Gun wash? • PUBLIC SECTION • Open Discussion • Fugitive Recovery Network (FRN) Forums
FRN Banner
wordpress-ad





Post new topic Reply to topic  [ 14 posts ]  Go to page 1, 2  Next
 
Author Message
 Post subject: Gun wash?
 Post Posted: Wed 17 Dec 2008 07:11 
Offline
in memoriam
User avatar

Joined: Fri 02 Mar 2007 10:51
Posts: 5055
Location: South Central Virginia
FRN Agency ID #: 1474
Experience: More than 10 years
You know how you can put jewelry and/or other stuff in a liquid that 'vibrates' and cleans the material? Well, does anyone know of a product or something similar that you can put gun metal parts into and clean them up... I know you can clean metal engine parts in something like that but I would like to clean up some antique weapons like this if possible... I don't want to "scrub" or mare the finish, nor do I want to re blue the finish... just clean them up without really harming the present finish... like remove surface rust without scratching and also to clean up the bore... I can clean them with Hoppies 9 or some other bore cleaner and all the other commercial stuff but I was wondering about a "wash" of some sort for overall cleansing...

_________________
Bill Marx, Sr.
"FREE STATE BAIL BONDS"
"FREE STATE INVESTIGATIONS"

DCJS: 99-176979
Cell: 434-294-0222

"Endeavor to Persevere" "Lone Watie"

"Good judgment comes from experience, and a lot of that , comes from bad judgment" "Will Rogers"


Top 
 Profile  
 
 Post subject: Re: Gun wash?
 Post Posted: Wed 17 Dec 2008 11:52 
Offline
Advanced Poster
Advanced Poster
User avatar

Joined: Thu 23 Nov 2006 18:44
Posts: 1311
Location: San Ramon, CA
FRN Agency ID #: 1366
Experience: 7 - 10 years
Bill...I'd be careful....The guys put mine in an ultrasound cleaning machine and it took the blueing right off...
Good thing that HK fell apart...literally, a few months later..I got it replaced and now clean it by hand..Hoppes #9 Powder Cleaner(it's really a liquid) Works wonders...

_________________
Kate
650.863.8470

" Yeah, I see ya, you ding dong..."


Top 
 Profile  
 
 Post subject: Re: Gun wash?
 Post Posted: Wed 17 Dec 2008 12:48 
Offline
in memoriam
User avatar

Joined: Fri 02 Mar 2007 10:51
Posts: 5055
Location: South Central Virginia
FRN Agency ID #: 1474
Experience: More than 10 years
BondgirlCT wrote:
Bill...I'd be careful....The guys put mine in an ultrasound cleaning machine and it took the blueing right off...
Good thing that HK fell apart...literally, a few months later..I got it replaced and now clean it by hand..Hoppes #9 Powder Cleaner(it's really a liquid) Works wonders...


That's exactly what I wanted.... good input... I was afraid of that... I have used that Hoppies #9 for 50 years.... it and a few newer cleaners work wonders... I just wanted to restore these great old guns to their former glory without removing anything of the bluing... thanks.

You say your HK fell apart!!!??? whew.... never had any of mine do that but then I don't own an HK of any persuasion...

I'm a Ruger, Beretta, Springfield Armory, Colt, SW kind of guy.... but there are some newer companies out there now that are not bad... and believe it or not.... one of the best shooters I have is a Taurus 9mm.... Beretta look alike....

_________________
Bill Marx, Sr.
"FREE STATE BAIL BONDS"
"FREE STATE INVESTIGATIONS"

DCJS: 99-176979
Cell: 434-294-0222

"Endeavor to Persevere" "Lone Watie"

"Good judgment comes from experience, and a lot of that , comes from bad judgment" "Will Rogers"


Top 
 Profile  
 
 Post subject: Re: Gun wash?
 Post Posted: Wed 17 Dec 2008 15:19 
 
Bill,

I've had a Tausus PT99 and a Ruger P89 for years. Both have been completely reliable and accurate. Back in the day I was a deputy, we carried revolvers. Had one deputy that looked just like Barney Fife! Back then I carried a Colt Python 357. Still have that one too and love it!


Top 
  
 
 Post subject: Re: Gun wash?
 Post Posted: Wed 17 Dec 2008 15:23 
Offline
in memoriam
User avatar

Joined: Fri 02 Mar 2007 10:51
Posts: 5055
Location: South Central Virginia
FRN Agency ID #: 1474
Experience: More than 10 years
midwestfr wrote:
Colt Python 357. Still have that one too and love it!


I had a Python 20 some years ago... sold it to my uncle for $600.00... he passed away later and I tried to buy it back from his widow... my aunt.... no way she was gonna let me have it back......... oh, well............ very nice piece... (the gun, not the aunt?! :shock: )

_________________
Bill Marx, Sr.
"FREE STATE BAIL BONDS"
"FREE STATE INVESTIGATIONS"

DCJS: 99-176979
Cell: 434-294-0222

"Endeavor to Persevere" "Lone Watie"

"Good judgment comes from experience, and a lot of that , comes from bad judgment" "Will Rogers"


Top 
 Profile  
 
 Post subject: Re: Gun wash?
 Post Posted: Wed 17 Dec 2008 19:55 
Offline
Advanced Poster
Advanced Poster
User avatar

Joined: Thu 23 Nov 2006 18:44
Posts: 1311
Location: San Ramon, CA
FRN Agency ID #: 1366
Experience: 7 - 10 years
The trigger pin came loose..I was supposed to shoot that day; good thing I didn't. Every small piece came apart and dropped thru the mag space onto the floor...bad scene.
It was under warranty, so I took it back to where I originally bought it and being friends wth the owner,
had a replacement for me the same day...no other problems since...shoots real good...

_________________
Kate
650.863.8470

" Yeah, I see ya, you ding dong..."


Top 
 Profile  
 
 Post subject: Re: Gun wash?
 Post Posted: Thu 18 Dec 2008 17:49 
Offline
Junior Poster
Junior Poster

Joined: Tue 25 Nov 2008 15:29
Posts: 20
Location: san antonio,tx
FRN Agency ID #: 0
Experience: None
Bill would you know any thing about the star BM 9mm?

_________________
james potts ,
san antonio,tx
roadman587@msn.com
830-837-9165
not licenes yet,but if i can be of service
let me know


Top 
 Profile  
 
 Post subject: Re: Gun wash?
 Post Posted: Thu 18 Dec 2008 19:26 
Offline
in memoriam
User avatar

Joined: Fri 02 Mar 2007 10:51
Posts: 5055
Location: South Central Virginia
FRN Agency ID #: 1474
Experience: More than 10 years
jumppo wrote:
Bill would you know any thing about the star BM 9mm?


I'll let you judge... I know they are very inexpensive and seem to be fairly good quality but no longer manufactured...

check out this site: http://www.hipowersandhandguns.com/Crit ... l%20BM.htm

_________________
Bill Marx, Sr.
"FREE STATE BAIL BONDS"
"FREE STATE INVESTIGATIONS"

DCJS: 99-176979
Cell: 434-294-0222

"Endeavor to Persevere" "Lone Watie"

"Good judgment comes from experience, and a lot of that , comes from bad judgment" "Will Rogers"


Top 
 Profile  
 
 Post subject: Re: Gun wash?
 Post Posted: Fri 19 Dec 2008 08:39 
Offline
Junior Poster
Junior Poster

Joined: Wed 30 May 2007 05:22
Posts: 35
Location: Paris, Texas
FRN Agency ID #: 0
Experience: 3 - 5 years
Bill, I wouldn't try an ultrasonic cleaner with an antique...but I could be wrong. I have a Colt SAA made in 1894 and only hand clean it.

We had an ultrasonic at the P.D. and it worked fine on my stainless S&W .357 and Colt .45 auto, but...a couple of Glocks jammed after being put in the lube bath, only time I've ever seen a Glock malfunction. They think they traced the jams to the lube being too thick on the guide rod. And I have a lot of respect for the combat tupperware; after a little shooting incident my partner was cleaning his Glock and found a very small pinhead sized pebble inside from where he had dove into a gravel driveway when the balloon went up to get out of the line of fire. He later fired about 10 rounds from the Glock at the guy and I dumped 6 rounds from my .45. Apparently the pebble got in between the small space between the slide and frame at the slide hold-open slot. I'll never forget that Glock working with a rock inside. :D

I'd ask someone experienced in antiques...like maybe go to the NRA website, or might try the curios and relics section on this site:

http://www.thefirearmsforum.com/

_________________
Mike Hedrick
Simon Investigations, L.L.C.
Texas License #A14171
P.O. Box 6425
Paris, Texas 75461
903.784.2617


Top 
 Profile  
 
 Post subject: Re: Gun wash?
 Post Posted: Fri 19 Dec 2008 10:56 
Offline
in memoriam
User avatar

Joined: Fri 02 Mar 2007 10:51
Posts: 5055
Location: South Central Virginia
FRN Agency ID #: 1474
Experience: More than 10 years
Simon wrote:
Bill, I wouldn't try an ultrasonic cleaner with an antique<<>>...http://www.thefirearmsforum.com/


I really appreciate the input... and I have already decided not to do any ultrasound stuff... just use some old favorites like Hoppies #9 and some newer stuff... I really want to get these great weapons in good shape but not re blue.... leaving the finish alone... just a good cleaning...

_________________
Bill Marx, Sr.
"FREE STATE BAIL BONDS"
"FREE STATE INVESTIGATIONS"

DCJS: 99-176979
Cell: 434-294-0222

"Endeavor to Persevere" "Lone Watie"

"Good judgment comes from experience, and a lot of that , comes from bad judgment" "Will Rogers"


Top 
 Profile  
 
Display posts from previous:  Sort by  
 
Post new topic Reply to topic  [ 14 posts ]  Go to page 1, 2  Next

FRN Forums » PUBLIC SECTION » Open Discussion


Who is online

Users browsing this forum: No registered users and 125 guests

 
 

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Fugitive Recovery Network

FRN Forum
Login
Forum
Register
Forum FAQ


Advertise on FRN



ad_here_1




smoke-shop